Buster & Punch Cross LED Dimmer Switches 250W Rotary | 5 Finishes

Description

Buster + Punch Cross LED Dimmer Switch — 1G to 4G | With & Without Logo

The Buster + Punch Cross LED Dimmer Switch is a premium architectural dimmer available in 1-gang, 2-gang, 3-gang, and 4-gang configurations, with your choice of logo or no-logo face plate. Each unit is crafted from solid stainless steel and finished in black, white, steel, brass, or smoked bronze. The rotary-style dimmer supports single-pole, 3-way, and 4-way wiring configurations with no neutral wire required — rated at 250W for LED loads at 120V.

Key Features

• Gang Count: Available in 1G, 2G, 3G, and 4G configurations for single and multi-switch installations.
• Wattage: 250W maximum LED load capacity per dimmer module.
• Voltage: Rated for 120V residential and commercial applications.
• Switch Style: Rotary dimmer control for smooth, precise light level adjustment.
• Wiring: Supports single-pole, 3-way, and 4-way configurations — no neutral wire required.
• Material: Solid stainless steel construction for superior durability and scratch resistance.
• Finish Options: Black, White, Steel, Brass, and Smoked Bronze — all with a 1/8 in. (4mm) shadow gap.
• Logo Options: Available with or without the Buster + Punch logo on the face plate.
• Dimensions: 2.75 in. W × 4.75 in. H × 3.12 in. L per module.
• Warranty: 2-year warranty for peace of mind.
• Care Instructions: Wipe with a dry lint-free cloth; avoid chemicals. Finishes may age naturally with use.

Construction & Interface

Each Cross dimmer is machined from solid stainless steel with a precision rotary knob, delivering a tactile, high-end feel consistent with the Buster + Punch Metal Electricity range. The 1/8 in. shadow gap creates a floating, architectural effect. Choose the logo version for a branded signature look, or the no-logo version for a clean, minimalist finish.

Dimming & Load Performance

Rated at 250W per module for LED loads at 120V. Compatible with most dimmable LED drivers and bulbs. No neutral wire is required, simplifying retrofit installations in standard single-gang, 3-way, and 4-way switch locations.

Wiring & Installation

Supports single-pole, 3-way, and 4-way wiring configurations. Always consult a licensed electrician when installing. Not suitable for damp or wet environments. Refer to the included installation guide for full wiring diagrams.