LEDVANCE Sylvania Hazardous Location LED Floodlight, 100W / 200W / 300W, 15000-45000lm, 5000K, 120-277V or 277-480V, Class I Div 2, IP66, Yoke Mount, Gray

Description

LEDVANCE Sylvania Hazardous Location LED Floodlight — 100W, 200W & 300W, 5000K, Class I Div 2 / Class II Div 1&2, IP66, 120-277V & 277-480V, Yoke Mount, Gray

The LEDVANCE Sylvania Performance Hazardous Location LED Floodlight is a heavy-duty, industrial-grade luminaire engineered for environments where explosive gases, combustible dusts, or flammable vapors are present. Available in 100W (66824/66827), 200W (66825/66828), and 300W (66826/66829) — each in both 120-277V and 277-480V voltage configurations — all six models deliver 150 lumens per watt at 5000K / 80 CRI through a copper-free aluminum housing rated IP66 and IK08. All models carry Class I, Division 2 and Class II, Division 1 & 2 hazardous location certifications, feature built-in 10kV surge protection, 0-10V dimming, and a factory-installed yoke mount. Rated for 100,000 hours L70 with a 5-year warranty, these fixtures are built for petrochemical plants, grain handling facilities, wastewater treatment, heavy manufacturing, and marine/offshore applications where standard fixtures cannot be used.

LEDVANCE Sylvania Hazardous Location Floodlight Features

• Class I, Division 2 & Class II, Division 1/2 Certified: Approved for use in locations where flammable gases, vapors, combustible dusts, or ignitable fibers may be present — meets NEC Article 500 hazardous location requirements.
• Three Wattage Options: 100W (15,000lm), 200W (30,000lm), and 300W (45,000lm) — all at 150 LPW efficacy for maximum energy efficiency at industrial scale.
• Two Voltage Options: 120-277V for standard commercial/industrial grids; 277-480V for high-voltage industrial power systems — no step-down transformer required.
• IP66 Rated: Fully sealed against dust ingress and direct high-pressure water jets — suitable for washdown environments and severe outdoor exposure.
• IK08 Impact Resistance: Impact-resistant polycarbonate lens withstands 5-joule mechanical impacts from tools, debris, and industrial equipment.
• Copper-Free Aluminum Housing: Corrosion-resistant die-cast aluminum construction — copper-free formulation prevents galvanic corrosion in petrochemical and marine environments.
• 10kV Surge Protection: Built-in transient surge protection guards the driver and LEDs against industrial power grid fluctuations and lightning events.
• 0-10V Dimming: Full dimming interface for integration with industrial lighting control systems and energy management programs.
• 5000K / 80 CRI: Daylight color temperature maximizes visual acuity for critical inspection, maintenance, and safety tasks in industrial environments.
• Wide Operating Temperature: Rated from -40°F to 122°F (-40°C to 50°C) for reliable operation in extreme cold and high-ambient industrial environments.
• Factory-Installed Yoke Mount: Heavy-duty yoke bracket included for fixed-angle wall or structure mounting; optional slipfitter mount available separately for pole applications.
• 100,000-Hour L70 Lifespan: Dramatically reduces re-lamping and maintenance costs in hard-to-access industrial installations.
• 5-Year Warranty: Backed by LEDVANCE Sylvania’s standard product warranty.

Hazardous Location Classifications

All models are certified for the following NEC hazardous location classifications:

• Class I, Division 2: Locations where flammable gases or vapors are handled, processed, or used, but are not normally present in ignitable concentrations — includes petrochemical plants, refineries, and fuel handling areas.
• Class II, Division 1: Locations where combustible dust is in the air in quantities sufficient to produce explosive or ignitable mixtures — includes grain elevators, flour mills, and coal handling facilities.
• Class II, Division 2: Locations where combustible dust is not normally in suspension but may accumulate on or near electrical equipment — includes agricultural storage and processing facilities.

Wattage & Configuration Options

• 100W — 120-277V (66824): 15,000lm — 150 LPW — 12.6”×9.5”×7.3” — 5000K / 80 CRI
• 100W — 277-480V (66827): 15,000lm — 150 LPW — 12.6”×9.5”×7.3” — 5000K / 80 CRI
• 200W — 120-277V (66825): 30,000lm — 150 LPW — 15.0”×9.1”×8.9” — 5000K / 80 CRI
• 200W — 277-480V (66828): 30,000lm — 150 LPW — 15.0”×9.1”×8.9” — 5000K / 80 CRI
• 300W — 120-277V (66826): 45,000lm — 150 LPW — 16.5”×11.8”×10.0” — 5000K / 80 CRI
• 300W — 277-480V (66829): 45,000lm — 150 LPW — 16.5”×11.8”×10.0” — 5000K / 80 CRI

All models: Copper-free aluminum — Gray finish — IP66 / IK08 — Class I Div 2 / Class II Div 1&2 — 0-10V dimming — 10kV surge — -40°F to 122°F — 100,000hr L70 — 5-year warranty — Yoke mount included

Typical Applications

• Petrochemical refineries, processing plants, and fuel storage facilities.
• Grain elevators, flour mills, and agricultural storage facilities.
• Wastewater treatment plants and pumping stations.
• Heavy manufacturing, foundry yards, and steel mills.
• Marine and offshore drilling platforms.
• Chemical processing and pharmaceutical manufacturing facilities.
• Coal handling and mining operations.

Performance & Light Output

All six models deliver a consistent 150 lumens per watt efficacy at 5000K daylight / 80 CRI — maximizing visual acuity for critical inspection, maintenance, and safety tasks. The 100W model produces 15,000lm, the 200W produces 30,000lm, and the 300W produces 45,000lm. The 100,000-hour L70 lifespan dramatically reduces maintenance frequency in hard-to-access industrial and hazardous installations.

Electrical & Controls

All models include a 0-10V dimming interface and built-in 10kV surge protection. The 120-277V models integrate directly into standard commercial and industrial power systems; the 277-480V models are designed for high-voltage industrial distribution systems without a step-down transformer. Both voltage configurations deliver identical lumen output and efficacy.

Construction & Durability

The die-cast copper-free aluminum housing resists corrosion in petrochemical, marine, and high-humidity environments where standard aluminum alloys may degrade. The IP66 rating provides complete dust exclusion and protection against direct high-pressure water jets. The IK08-rated polycarbonate lens withstands 5-joule mechanical impacts. The fixture operates reliably across a -40°F to 122°F ambient temperature range.

Installation & Mounting

All models include a factory-installed heavy-duty yoke mount for fixed-angle wall or structural mounting. The yoke allows horizontal and vertical aiming adjustment for precise beam positioning. An optional slipfitter mount (sold separately) is available for pole-top or arm mounting applications. Conduit entry points are provided for sealed wiring connections in hazardous location installations.

What’s Included

• LEDVANCE Sylvania Hazardous Location LED Floodlight — Gray (wattage and voltage selected above)
• Factory-Installed Yoke Mount Bracket
• Slipfitter mount sold separately